High Density Upholstery Seat Foam Cushion Replacement Per Sheet Standard Sizes

Description

Upholstery Foam Cushion
is the most common stuffing material used today. It’s available in several densities which determine the grade and quality of the foam. The higher the number, the better the quality.
Upholstery foam is the most common stuffing material used today. It’s available in several densities which determine the grade and quality of the foam. The higher the number, the better the quality.
If the foam in your sofa cushions is not up to the task, it can start to disintegrate and lose its rebound-ability in a short time. The sagging cushions can make the whole piece of furniture appear old and tired and make it very uncomfortable for sitting. Replacing the foam is a task a DIY-err can face with confidence when armed with some couch cushion foam know-how. TIRED OF YOUR SAD-LOOKING COUCH? GIVE IT A TOUCH UP! With these high quality, premium upholstery foam cushions, you can easily replace your old foam while retaining your much-loved couch! Made of polyurethane foam and available in 3 different densities, you get a foam with the perfect amount of cushioning and stiffness. Each foam cushion would hold its firmness for 3-7 years, depending on the density and the usage. ::: DENSITIES AVAILABLE: (1) REGULAR DENSITY – has a compression rate of 33LBS and is suitable for light use and decorative applications; (2) MEDIUM DENSITY – has a compression rate of 36LBS and it features the perfect amount of cushioning and stiffness, it’s soft but still holds its firmness; (3) HIGH DENSITY – has a compression rate of 28-33 LBS, has a 100% recovery rate and is designed for heavy traffic and high use applications, can last from 5-7yrs. ::: USES : Ideal for oval and round poker tables, furniture cushions, boat cushions, car cushions, foam mattresses, bedding support, and all other come and commercial upholstery applications. ::: FOAM PACKAGES NEED TO BE OPENED IMMEDIATELY ONCE YOU RECEIVE THE PACKAGE. DO NOT LET THE FOAM SIT UNOPENED FOR MORE THAN 1 WEEK! DO NOT OPEN WITH A BOX CUTTER! USE A BALL POINT PEN OR A PENCIL. START BY MAKING A LITTLE INCISION AND BREAK IT FROM THERE.Do not open the box with a box cutter! Use a ball point pen or a pencil. Start by making a little incision and break it from there.
REGULAR DENSITY
– has a compression rate of 33LBS and is suitable for light use and decorative applications;
MEDIUM DENSITY
– has a compression rate of 36LBS and it features the perfect amount of cushioning and stiffness, it’s soft but still holds its firmness;
New
HIGH DENSITY
– has a compression rate of 28-33 LBS, has a 100% recovery rate and is designed for heavy traffic and high use applications and soft for comfort and long life, can last from 5-7yrs
Upholstery Foam
upholstery foam 3 inch
upholstery foam block
Conforms to the California Bureau of Home Furnishings Fire Retardant 117-2013
Density Cushion
DENSITIES AVAILABLE: (1) REGULAR DENSITY – has a compression rate of 33LBS and is suitable for light use and decorative applications; (2) MEDIUM DENSITY – has a compression rate of 36LBS and it features the perfect amount of cushioning and stiffness, it’s soft but still holds its firmness; (3) New HIGH DENSITY – has a compression rate of 28-33 LBS, has a 100% recovery rate and is designed for heavy traffic and high use applications and soft for comfort and long life
upholstery foam bulk
upholstery foam backing
upholstery foam couch
upholstery foam boat
upholstery foam cushion
upholstery foam cutter
upholstery foam cushion
upholstery foam roll
How to measure (Measurements Needed)
Older cushions tend to spread or flatten out over time and may throw off measurements
Remember not to flatten or press your cushions down while measuring
Make sure to measure seam to seam, not edge to edge
Whether it’s for a patio chair, bar stool or other seat, your custom seat cushions will be made to your dimensions. Follow these steps to ensure a proper fit for your custom cushion.
Sometimes, over the years well-worn cushions become misshapen. It is strongly recommended that you measure your existing piece of furniture or space. DO NOT measure the old cushion.
Use a firm tape measure rather than a flexible measuring tape
Keep in mind that when ordering, you will need to round up or round down to the nearest ½ inch.
If you are also ordering a back cushion for your furniture: Make sure to subtract the thickness of the seat cushion from the height of your furniture’s back dimension, or the back cushion will be taller than the back support when put into position.
What is the CAL 117 rating?
California Technical Bulletin 117, otherwise known as CAL 117 for short, is a regulation that sets the standard for upholstered furniture flammability in the furniture industry. While the regulation is only legally binding in the state of California, it has become a nationwide standard because the state represents such a huge market. CAL 117 requires that certain materials that are used in residential furniture pass both an open flame and smolder test.
How is upholstered furniture tested?
The tests are conducted within a closed test chamber where technicians can measure how quickly the open flame spreads and grows. The smolder test involves placing a lit cigarette on the furniture and measuring the length of the char that forms. Technicians also measure the amount of heat, smoke and carbon monoxide that is generated. Once the results have been recorded, they are then compared to specific criteria and a successful score will result in a certification for the manufacturer.
History of CAL 117 and Current Requirements
The requirement was originally issued in 1975 to protect consumers from purchasing products that had the potential to easily catch fire and act as an accelerant. The first set of standards dealt mostly with the filling materials, but since most fires don’t begin on the inside. In 2015, the newly revised version shifted the focus to cover materials and how they interact with filling. CAL 117 now comes with the following requirements:
Upholstery cover fabrics, filling materials and other materials must pass certain smolder resistant requirements.
If these components do not meet flammability standards, then a barrier material must be added for protection.
Flame retardant chemicals can be added to furniture although they are subject to their own set of requirements.
Manufacturers who don’t comply with flammability or labeling regulations are subject to a series of fines and will be required to cover the cost of further compliance testing.
There are some exceptions, such as for furniture that will be used exclusively outdoors. Otherwise, you will want to be on the lookout for products that come with a CAL 117 label. This indicates that you are investing in a product that meets certain standards and a manufacturer who cares about their customers.